The "Heart" of any Car Wash Equipment
is the pump. We use exclusively CAT Pumps, which are belt-driven by
a totally enclosed fan cooled motor, and are oversized to your actual
usage. This gives your equipment the longest life possible.
Our commitment to quality doesn't stop with the pumps. We also use
an all-steel galvanized frame and multi-compartment stainless steel
tanks. These materials are more expensive than alternatives, but will
not rust or flake and will provide years of trouble-free service.
Base Units |
 |
| Model |
GPM/PSI |
HP |
Phase |
Price |
| 310/S/50-1 |
3.7 @ 2000 |
5 |
Single Phase |
$2,050.00 |
| 310/S/50-3 |
3.7 @ 2000 |
5 |
Triple Phase |
$1,950.00 |
| |
| |
Features |
 |
- Cat 310, oil-bathed, belt drive, ceramic
plunger pump
- 5 HP TEFC three-phase motor (optional
single phase available)
- Galvanized frame
- Belt guards
- Pressure regulator/unloader valve
- Liquid filled gauge
- Pressure adjustable to 2000 PSI
- Volume adjustable to 4 GPM
|
| |
 |
| Model |
GPM/PSI |
HP |
Phase |
Price |
| 530/S/75-1 |
4.4 @ 2500 |
7.5 |
Single Phase |
$2,950.00 |
| 530/S/75-3 |
4.4 @ 2500 |
7.5 |
Three Phase |
$2,600.00 |
| 530/S/10-3 |
5 @ 2500 |
10 |
Three Phase |
$2,750.00 |
| |
| |
Features |
 |
- Cat 530, oil-bathed, belt drive, ceramic
plunger pump
- 5 HP TEFC three-phase motor (optional
single phase available)
- Galvanized frame
- Belt guards
- Pressure regulator/unloader valve
- Liquid filled gauge
- Pressure adjustable to 2500 PSI
- Volume adjustable to 5 GPM
|
| |
 |
| Model |
GPM/PSI |
HP |
Phase |
Price |
| 650/S/15-3 |
7 @ 3000 |
15 |
Three Phase |
$3,850.00 |
| |
| |
Features |
|
- Cat 650, oil-bathed, belt drive, ceramic
plunger pump
- 5 HP TEFC three-phase motor (optional
single phase available)
- Galvanized frame
- Belt guards
- Pressure regulator/unloader valve
- Liquid filled gauge
- Pressure adjustable to 3000 PSI
- Volume adjustable to 7 GPM
|
| |
 |
| Model |
GPM/PSI |
HP |
Phase |
Price |
| 1050/S/15-3 |
10 @ 2200 |
15 |
Three Phase |
$3,850.00 |
| |
| |
Features |
|
- Cat 1050, oil-bathed, belt drive, ceramic
plunger pump
- 5 HP TEFC three-phase motor (optional
single phase available)
- Galvanized frame
- Belt guards
- Pressure regulator/unloader valve
- Liquid filled gauge
- Pressure adjustable to 2200 PSI
- Volume adjustable to 10 GPM
|
| |
| Options and Accessories |
| |
| Starters: |
| |
Manual cam switch with enclosure and wire (310/S/50-1
only) |
$155.00 |
| |
Full voltage magnetic starter with enclosure and overload |
$395.00 |
| |
Nema 4, 12 x 12 starter panel with 24-volt controls, contractor,
overload, transformer. (Required for remotes and/or auto stop/start). |
$625.00 |
| |
Auto stop/start. (Add to the above panel). |
$250.00 |
| |
PVC enclosure for remote soap/off/rinse. Comes with stainless steel
24-volt soap solenoid valve (tank option required). |
$95.00 |
| |
PVC enclosure for remote auto stop and push to start feature. |
$135.00 |
| |
PVC enclosure, as above, with soap on/off. |
$195.00 |
| |
|
|
| Tank Options (Required if high
pressure soap application is desired): |
| |
Aluminium 12 x 10 tank. Comes with float valve and manual
ball valve for soap. |
$175.00 |
| |
Two compartment stainless steel tank. Comes with float valve, hydrominder
for auto soap proportioning, and manual ball valve for soap on/off.
|
$675.00 |
| |
|
|
| Additional Options: |
| |
Downstream, low-pressure, soap injector |
$39.00 |
| |
Trigger gun. 36” insulated wand, stainless steel spray tip
and swivel. |
$95.00 |
| |
Gun. Dual wand, as above, for low-pressure soap. |
$160.00 |
| |
50’ x 3/8” high-pressure Neptune hose assembly. |
$95.00 |
| |
100’ x 3/8” high-pressure Neptune hose assembly. |
$170.00 |
| |
#6230, 140’ capacity hand crank hose reel. |
$235.00 |
| |
#6235, 275’ capacity hand crank hose reel. |
$265.00 |
| |
Landa NG 3000, instantaneous heater. |
$3,350.00 |
| |
#360-8PW, 8’ overhead boom assembly. |
$295.00 |
| |
#360-5PW, 5’ overhead boom assembly. |
$275.00 |
| |
|
|
| |
Other options/accessories available.
Call for pricing.
Prices subject to change without notice. |
|
 |
